首页|嵌入式系统|显示技术|模拟IC/电源|元件与制造|其他IC/制程|消费类电子|无线/通信|汽车电子|工业控制|医疗电子|测试测量
首页 > 分享下载 > 嵌入式系统 > 【应用笔记】经以太网远程配置Nios II处理器(Remote Configuration Over Ethernet with the Nios II Processor)

【应用笔记】经以太网远程配置Nios II处理器(Remote Configuration Over Ethernet with the Nios II Processor)

资料介绍
【应用笔记】经以太网远程配置Nios II处理器(Remote Configuration Over Ethernet with the Nios II Processor)
嵌入式硬件系统中的固件频繁地通过以太网升级。
Firmware in embedded hardware systems is frequently updated over the Ethernet. For
embedded systems that comprise a discrete microprocessor and the devices it controls, the
firmware is the software image run by the microprocessor. When the embedded system
includes an FPGA, firmware updates include updates of the hardware image on the FPGA. If
the FPGA includes a Nios® II soft processor, you can upgrade both the Nios II processor—as
part of the FPGA image—and the software that the Nios II processor runs, in a single remote
configuration session.
Remote Configuration Over Ethernet with
the Nios II Processor

April 2010 AN-429-3.0




Introduction
Firmware in embedded hardware systems is frequently updated over the Ethernet. For
embedded systems that comprise a discrete microprocessor and the devices it controls, the
firmware is the software image run by the microprocessor. When the embedded system
includes an FPGA, firmware updates include updates of the hardware image on the FPGA. If
the FPGA includes a Nios II soft processor, you c
【应用笔记】经以太网远程配置Nios II处理器(Remote Configuration Over Ethernet with the Nios II Processor)
本地下载

评论